Fostex VF08 Manuel d'utilisateur télécharger pdf (Page 82)

Save/Load of Song data

Digital equipment

Blinking

OFF

MIDI

OUTPUT INPUT OUTPUT

INPUT

POWER

PHANTOM

S/P DIF / DATA

VF08

S/P DIF DATA OUTPUT

Saving data using the S/PDIF digital signal

You can save data using the S/PDIF digital signal via the [S/P DIF DATA OUTPUT] (coaxial) jack.

*Use an external digital recorder that supports 44.1 kHz sampling frequency (the same as the VF08).

Connecting to an external digital recorder

Connect the [S/P DIF DATA OUTPUT] jack to the

digital input jack of the external digital recorder

(DAT, etc.).

<Note>

Do not do anything, such as unplug the connecting

cable, that interrupts the digital signal until the saving

operation is completed. Otherwise, the unit may

generates a noise which damages an external recorder.

• If your digital recorder only provide the optical digital

input jack and does not provide the coaxial jack, use

the optional COP-1 (optical/coaxial converter).

• Do not connect digital signals for both directions

between the VF08 and the external recorder (i.e. the

digital output of the VF08 to the digital input of the

external recorder and the digital output of the external

recorder to the digital input of the VF08), which may

form a digital loop and cause feedback.

Setting the external recorder

Set the sampling frequency to 44.1 kHz (the same as

the VF08).

Set the input source to "digital input" to accept the

signal from the VF08.

Some machine also needs to select the clock reference

to "external" when setting the input source to "digital

input". See the operation manual of the machine for

the detailed information.

<Note>

If you cannot hear the input signal or you hear

digital noise when monitoring the source signal of

the external digital recorder, check the connections,

cables and settings of both the VF08 and the external

recorder.

*See the operation manual of the external recorder for the

detailed information.

Saving data

You can save data via the "Save PGM" menu in the

setup mode.

•Output signal options: S/PDIF and SCSI

•Program options: P01 to P99 (an individual Program)

•Track options:

When using S/PDIF:

Tracks 1-8, Tracks 1-16, Tracks 1-24, Tracks 9-16, Tracks 9-24

or Tracks 17-24.

When using a SCSI disk:

All tracks (1-24) is selected automatically. (You can select tracks

individually when saving by the WAV file format).

Press the [SETUP] key to enter the setup mode.

The display shows the screen for selecting the setup

menu.

Use the [JOG] dial to select "Save PGM" and press

the [ENTER/YES] key.

The display shows the screen for selecting the device

to which the data is saved. "SCSI" blinks.

"SCSI" should be selected when saving or loading data via

"SCSI."

Use the [JOG] dial or [CURSOR] keys to select

"SPDIF" and press the [ENTER/YES] key.

The display shows the screen for selecting the program

to be saved.

The program number currently selected blinks, while

the data size of the program is shown. While a program

number is blinking, you can select the desired program

to be saved.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 117 118

Commentaires sur ces manuels

Pas de commentaire

Fostex VF08 Manuel d'utilisateur Page 82

Commentaires sur ces manuels

Produits connexes et manuels pour Pianos numériques Fostex VF08