Fostex VF08 Manuel d'utilisateur télécharger pdf (Page 38)

Mixer Functions

Blinking

Editing EQ

The VF08 is equipped with 2-band (HI and LO) EQ for Tracks 1 through 6. 36 preset entries are available in the

EQ library.

<Note>

You can apply EQ only to Tracks 1 through 6. You cannot

apply EQ to Tracks 7/8.

Press the [EQ] key.

The EQ screen appears.

If you have not edited any track parameter for EQ, pan

or effect send setting after turning on the power last

time, the message prompting to select a track ("Select

TRK!") blinks, as well as the [TRACK STATUS/TRACK

SEL] keys for Tracks 1 through 6 on the panel flash.

If you have edited any track parameter for pan, EQ or

effect send setting after turning on the power last time,

the icon for the previously edited track is highlighted,

showing that it can be edited.

Select the desired track by pressing the correspond-

ing [TRACK STATUS/TRACK SEL] key (or using the

[CURSOR </>] keys).

The selected track number and library entry name

(shown as "EQ-1" and "L00:2-SHLV" respectively in the

screen example below) are shown, together with the

current settings. The gain value of Hi EQ ("Hi Gain")

blinks, indicating that you can edit it.

Use the [CURSOR up/down] key to select a parameter

to be edited.

Each time you press the [CURSOR/down] key, the blink-

ing parameter (to be edited) changes in the following

order. Hi Gain -> Lo Gain -> EQ ON/OFF -> library en-

try ->Hi Gain...

Pressing the [CURSOR/up] key changes the blinking

parameter in the reverse order.

Use the [JOG] dial to edit the parameter value.

The following values are available for each parameter.

Hi Gain

Lo Gain

ON/OFF

-18 dB through 0 dB to +18 dB in 1 dB steps.

The current EQ curve is shown graphically accord-

ing to the current values.

-18 dB through 0 dB to +18 dB in 1 dB steps.

The current EQ curve is shown graphically accord-

ing to the current values.

ON or OFF of EQ

Library

Selectable from 36 preset library entries (L00

through L36). The default is "L00: 2-SHLV.

After selecting the desired library, press the [EN-

TER/YES] key to confirm the setting.

*See the following table for details about the EQ

library.

Setting example 1: Set "Hi Gain" to "+11 dB."

The high frequency gain is boosted up as shown graphi-

cally.

Setting example 2: Set "Lo Gain" to "-8 dB."

The low frequency gain is cut as shown graphically.

Setting example 3: Set "EQ library" to "L03."

The high frequency gain is boosted up as shown graphi-

cally.

By using the [JOG] dial to select "L03": Ana.Kick" and

pressing the [ENTER/YES] key, the preset parameter

values are shown together with the corresponding EQ

curve.

You can edit parameters from this preset condition and

store the setting as a scene. Note that if you turn off

the power, the setting is cleared.

To edit the EQ for another track, repeat steps 2 through

After completing EQ editing, press the [EXIT/NO] key.

The VF08 exits the EQ edit mode and the LCD display

returns to the Normal screen.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 117 118

Commentaires sur ces manuels

Pas de commentaire

Fostex VF08 Manuel d'utilisateur Page 38

Commentaires sur ces manuels

Produits connexes et manuels pour Pianos numériques Fostex VF08